"Our job is helping you do your job"
800.544.2843Email 
  • ACT Series

    The ACT-1B can be factory configured to meet your specifications or user configured on site with the optional USB Programming Cable and Software.

    The ACT-3X Panel Tachometer is a powerful NIST calibrated fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device. The unit operates from 120/240Vac input power or from 12 or 24Vdc input power (optional). Programming is easily performed through the 5 front panel push buttons or using the optional PM Remote Software. Set up for single channel monitoring or use the auxiliary second channel input. Programmable scale factor with menu selection for multiple pulses per revolution, linear rates, totalization, single event trip speeds and rate of change in rpm. A TTL pulse repeater output is standard.

     

  • F2A1X

    The F2A1X Frequency to Analog module converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mAdc) output. The output signal is electrically isolated from input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A1X is factory preprogrammed with the full scale output and input scale factor of your choice. These settings are also user configurable with the optional USB programming cable and PM Remote Software. PM Remote Software also displays data in real-time and allows data to be stored directly to Microsoft Excel. The F2A1X requires 12-24Vdc input power.

    Features:

    • Economically priced
    • Compact, rugged and lightweight construction
    • Electrically isolated input/output
    • Compatible with most speed sensors
    • 12 to 24 Vdc input power
    • User configurable*
    • View real-time data on PC*
    • Store data in Excel file in real-time*
    • -20mA or 0-5Vdc scalable output
    • 5Vdc or 10Vdc sensor supply (jumper selectable)
    • *Requires optional USB programming cable and PM Remote Software 

    Typical Uses:

    • Process monitoring
    • Tachometer signal generator
    • QC and R&D
    • Engine performance
    • Signal conditioning
    • Data acquisition
    • Motor or pump monitoring

  • F2A3X

    The F2A3X Frequency to Analog Converter is a DIN rail module that converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mAdc) output. The output signal is electrically isolated from the input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A3X is completely user programmable using the included PM Remote Software.

    Features:

    • Standard DIN rail mounting
    • Ethernet communications available
    • 5 to 999,990 RPM range (0.083 to 250kHz)
    • Compatible with most speed sensors (TTL)
    • 12 to 24 Vdc input power
    • Alarm set point with optional relay output
    • Pulse repeater output
    • User configurable
    • View real-time data on PC
    • 4-20mA or 0-5 Vdc scalable output
    • 10 Vdc or 5 Vdc sensor excitation

    Typical Uses:

    • Process monitoring over networks
    • Tachometer signal generator
    • QC and R&D
    • Engine performance
    • Signal conditioning
    • Data aqcquisition
    • Motor or pump monitoring


     

  • 6180-031
  • DT-205LR
  • ST-5000