"Our job is helping you do your job"
800.544.2843Email 

The nVision is not just a new data-logging calibrator.

It's a field calibrator that can display data graphically on a high resolution screen.

No need to stop a test to analyze data on a PC. Live data can be displayed graphically, with the ability to zoom into specific events, or zoom out to get a big picture of your test.
There's never been anything like this!

·  Up to 0.025% of Reading accuracy.

·  nVision modules are complete and independent: Each contains dedicated signal conditioning and a microcontroller.

·  Modules can be removed, exchanged, and even calibrated without the base.

·  Fully temperature compensated from -20ºC to 50ºC

·  ATEX/IECEx intrinsically safe.

·  Log and display 500,000 points at up to 10 readings/ second on two sensor modules simultaneously.

·  IP67 (enclosure 1m submersible up to 30 min).

·  Uses Crystal's revolutionary new leak-free CPF fittings system.

·  Interactive real-time graphing of measurements.

·  Discover events (spikes) or trends (leaks) in real time.

nVision is a very accurate field pressure calibrator that records and displays data graphically, on a large (255 x 160 pixel) backlit display. Temperature, voltage and current can also be measured and recorded-depending on which modules you choose. nVision give you the ability to examine data on screen-no PC required. Compare pressure with temperature on a single screen for leak and static tests. Or use the scrolling and zooming features to observe the repeatability and high speed performance of pressure safety valves (with an accuracy never possible before).

However, with a PC, a USB cable, and CrystalControl software (free), you can monitor and download the data from an ongoing test without interrupting recording! Any current and all previously recorded data can be viewed, and/or saved for a permanent record of a test. CrystalControl includes several Excel spreadsheet report formats, or design your own. Test reports have never been easier, faster or more accurate! nVision!

Modules can be installed in either or both chassis bays, or removed, exchanged, and even calibrated without the nVision base.

1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 
Baro
BARO
Barometric Sensor Module (Internally Mounted)
$635.00
nVision Reference Pressure Recorders
NV-4AA
nVision Base
$1,380.00
crystal_pressure_sensor
30PSI
nVision 30 PSI Pressure Module
$1,965.00
crystal_pressure_sensor
100PSI
nVision 100 PSI Pressure Module
$1,965.00
crystal_pressure_sensor
300PSI
nVision 300 PSI Pressure Module
$1,965.00
crystal_pressure_sensor
1KPSI
nVision 1000 PSI Pressure Module
$1,635.00
crystal_pressure_sensor
3KPSI
nVision 3000 PSI Pressure Module
$1,635.00
crystal_pressure_sensor
10KPSI
nVision 10000 PSI Pressure Module
$1,635.00
crystal_pressure_sensor
15KPSI
nVision 15000 PSI Pressure Module
$1,965.00
crystal_rtd100_module
RTD100
nVision RTD100 Temperature Module
$625.00
crystal_ma20_module
MA20
nVision Current, Voltage, and Switch Test Module
$625.00
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1