"Our job is helping you do your job"
800.544.2843Email 
  • 405AR Timer

    On Delay / Interval Timing Modes: The 405AR has two modes of operation, On Delay or Interval timing modes. The unit has a set DPDT output contacts rated for 10 amps resistive. When in ON-Delay Mode, the contacts transfer at time out. When in the interval Mode, the contacts transfer when power is applied and released at time out.

    Universal Power: All 405 AR timers can be powered using 20 to 240V AC or 12 to 240V DC power, reducing inventory management of replacement units.

    1/16 DIN Housing: The 48mm (1/16 DIN) housing is compact and rated for P40 on the face plate. The 405AR is mounted in a 8-pin round socket.

    The dial on the 405AR is extra large and easy to read. When fractional ranges are selected, decimal points are clearly marked.

    The Mode select and Range select switches are located on the front of the unit, so that when panel mounted allows quick change of mode or range of the unit.

    Features:

    • On Delay / Interval
    • 12 Timing Ranges
    • Universal Supply Voltage
    • Compact Size
    • IP 40 rated front
    • LED power on, relay on

  • 425A Timer

    Digital Setting: The 425A is set digitally by rotating each setting knob until the desired Time Preset is displayed by the number wheels on the front of the timer. The digital setting allows exact, accurate and repeatable timing cycles.

    High Accuracy: The 425A utilizes a crystal controlled oscillator which provides 0.1% timing accuracy across all rated voltages and temperatures.

    Cycle Progress Indication: The 425A offers the industry’s brightest green LED display in a 1/16 DIN package. Depending on the Model, the three-digit LED display will time UP to or DOWN from the Time Preset.

    Through its internal micro controller, the 425A keeps track of the time setting by monitoring each of the three Time Preset switches. Whenever a change is made in the time preset, even during a cycle, the 425A instantly re-computes and adjusts the current timing cycle.

    1/16 DIN Housing: The 48mm2 (1/16 DIN) housing is compact, allowing the 425A to be panel mounted or plug-in using an 8-pin octal socket. The decimal point and sec/min/hrs switches are located on the side of the unit. When panel mounted, these range switches are not accessible to the operator. This Tamper-proof feature prevents unauthorized or hazardous changes to the timing range.

    Memory Option: The 425A can be ordered as standard with an EEPROM memory. This allows the 425A to retain the elapse time or time remaining during momentary or sustained power interruptions.

    Instantaneous and Delayed Relay Versions: A version of the 425A is available with one set of SPDT instantaneous contacts and one set of SPDT delayed contacts.

    Delayed Relay Version: A version of the 425A is available with DPDT delayed contacts.

    Model 425A300Q10XX (SPDT Instantaneous & SPDT Delayed Relays): Timing starts when power is applied to terminals 2 and 7. The instantaneous relay energizes, the LED digital display begins to increment from 0 and the timing LED blinks slowly. When the preset value is reached, the LED blinks rapidly and the Delayed SPDT relay is energized. The timer remains in this timed-out condition until reset by removing power.

    Model 425A300Q20XX (DPDT Delayed Relay): Timing starts when power is applied to terminals 2 and 7. The LED display begins to increment from 0 and the timing LED blinks slowly. When the preset value is reached, the LED stops, the timing LED blinks rapidly and the Delayed DPDT relay energizes. The timer remains in this timed-out condition until reset by removing power.

    Model 425A300Q10MX & Model 425A300Q20MX (Memory Option): Operation is same as above, however, units will not reset when power is removed during the timing cycle. Timers with this option can only be reset after time-out, or by adjusting the setting knobs to 000 during the timing cycle.

    CAUTION: Be advised that the relay(s) will transfer when setting knobs are adjusted to 000 when power is applied.

  • 409B Timer

    Push Button Start/Internal: The 409B has a Push Button built into its front dial. When pressed, the timer starts and provides an interval time delay. The 409B has a set of DPDT output contacts. When the Push Button is pressed with power applied, the contacts immediately transfer. After the timer has timed out, the contacts release.

    Universal Power Supply: All 409B timers can be powered using 24-240 VAC or 24 VDC power, greatly simplifying ordering and inventory management of replacement units.

    High Accuracy: The 409B’s timing circuit is not a simple RC circuit. It utilizes the sophistication of a proprietary integrated circuit that includes counting technology along with a stable oscillator to provide repeatable time delays.

    1/16 DIN Housing: The 48mm2 (1/16 DIN) housing is compact and is watertight when panel mounted. The 409B is mounted in an 8-pin round (octal) socket. With an optional mounting clip, the 409B can be panel mounted.

    The dial on the 409B is extra large and is easy to read. When fractional ranges are selected, decimal points are clearly indicated.

    The Range Select Switch is located on the side of the unit, so that when panel mounted, this switch is not accessible to the operator. This tamper proof feature prevents unauthorized or hazardous changes to the timing range from being made.

    Features:

    • Push Button Start, Interval Timing Mode
    • Push Button Integral to front dial
    • Output Contacts rated 10A at 120/240 VAC and 30 VDC
    • Six Timing Ranges in a single unit:
      1 and 10 sec., min., and hours
      5 and 50 sec., min., and hours
    • Universal Power Supply: 24-240 VAC and 24 VDC
    • 48mm2 DIN Standard housing
    • Large and easy to read dial shows decimal points
    • Round (octal) socket mount or mount in panel cutout
    • Watertight when panel mounted
    • Range and Mode select are tamper proof when panel-mounted

  • 407C Timer

    Multiple Timing Modes: The 407C is available with selectable On-Delay, Off-Delay or Interval timing modes. These timing modes energize a set of DPDT output contacts. When in the On-Delay mode, the 407C begins timing when the timer is energized. In On-Delay mode, the contacts transfer at time out. When in the Off-Delay mode, the 407C begins timing when the Start input is de-energized. In Off-Delay mode, the contacts transfer at time out. When in the Interval mode, the contacts transfer when the timer is energized. In Interval mode, the contacts release at time out.

    Universal Power Supply: All 407C timers can be powered using 24-240 VAC or 24 VDC power, greatly simplifying ordering and inventory management of replacement units.

    High Accuracy: The 407C’s timing circuit is not a simple RC circuit. It utilizes the sophistication of a proprietary integrated circuit that includes counting technology along with a stable oscillator to provide repeatable time delays.

    1/16 DIN Housing: The 48mm2 (1/16 DIN) housing is compact and is watertight when panel mounted. The 407C is mounted in an 11-pin round socket. With an optional mounting clip, the 407C can be panel mounted.

    The Dial on the 407C is extra large and is easy to read. When fractional ranges are selected, decimal points are clearly indicated.

    The Mode select and Range select switches are located on the side of the unit, so that when panel mounted, these switches are not accessible to the operator. This tamper proof feature prevents unauthorized or hazardous changes to the timing mode and range from being made.

    Cycle Progress Indication: The 407C LED indicator provides a unique and effective method of cycle progress indication. Off before timing, the LED blinks at an ever increasing rate as the cycle progresses; once every 3-1/2 seconds during the first 10% of the cycle, twice during the second 10%, and so on. At time out, the LED pulses at a high rate. (In the 1, 5, 10 and 50 second ranges, the LED is Off before timing, steady On during timing, and pulsing On after time-out).

    Features:

    • Selectable On-Delay/Off-Delay/Interval Timing Modes
    • Separate Start Input
    • Output Contacts rated 10A at 120/240 VAC and 30 VDC
    • Six Timing Ranges in a single unit:
      1 and 10 sec., min., and hours
      5 and 50 sec., min., and hours
    • Universal Power Supply; 24-240 VAC and 24 VDC
    • 48mm2 DIN Standard housing
    • Large and easy to read dial shows decimal points
    • Round (octal) socket mount or mount in panel cutout
    • Watertight when panel mounted
    • Range and Mode select are tamper proof when panel mounted
    • Unique flashing cycle progress indication

  • 417B Timer

    The 417B True Off-Delay Timer is designed for the most rugged industrial environments. It offers exceptional electrical noise immunity, with excellent setting and repeat accuracy.

    Each 417B can be powered from 24VAC to 240VAC and 24VDC, greatly simplifying ordering and inventory management.

    The 48mm2 (1/16 DIN) housing is compact and watertight when panel-mounted. The 417B is mounted in an 8-pin octal or 11-pin round socket. The 417B can be panel-mounted with an optional mounting clip.

    A large time-setting knob is provided for easy adjustment by operator.

    The range select switch is located on the side of the unit; therefore, once panel-mounted, the switch is not accessible to the operator. This tamper-proof feature prevents unauthorized or hazardous changes to the timing range.

    The 417’s high intensity LED turns on when power is applied to the timer. It turns off during timing.

    Features:

    • True Off-Delay mode of operation
    • Output contacts rated 10A at 120/240 VAC
    • Three timing ranges in a single unit:
      10 sec., 1 min., 10 min.
      5 sec., 0.5 min., 5 min.
    • Universal power operation: 24 VAC to 240 VAC & 24 VDC
    • 8-Pin or 11-Pin mounting.
    • Remote reset models.
    • 48mm2 DIN standard housing
    • Watertight when panel-mounted
    • Range selection is tamper-proof when panel-mounted.

  • 422AR Timer

    The 422AR Flip-Flop timer are available with Repeat Cycle operations. During Repeat Cycle operation the 422AR cycle ON and OFF repeatedly, allowing periodic cycling of a load. Two knobs are available to individually adjust the ON-time and the OFF-time. The 422AR can be configured with either the relay being energized during the first timing period or de-energized during the first timing period.

    The 422AR have 6 selectable timing ranges available for both ON-time and OFF-time periods. The ranges are 1 and 10 SEC/MIN/HRS dip switch selectable. Having this flexibility allows for a load to be energized for a brief time over a cycle that lasts up to 10 hours. This is deal for lubrication or other maintenance functins that must occur each shift or day during a plant operation.

    The 422AR 1/16 DIN housing is compact, and designed for panel mounting. The timer is mounted in an 8-pin round socket. The front of the 422AR features 2 knobs. One knob is used to set the ON-time and the other knob is used to set the OFF-time for the timer’s cycle. The 422AR is universal powered by 20 to 240 VAC or 12 to 240 VDC
    operation voltage.

    The output of the 422AR has a DPDT mechanical relay which is rated for 10 amps @ 250 VAC resistive. The 422AR can be ordered in a terminal option which is only available with 5 amp Relay output. The 422′s have individual LED indicators for ON time and OFF time. These LED’s provide a unique and effective method of cycle progress indication.


    Six Selectable Ranges:
    1 and 10 SEC/MIN/HRS
    • Individual adjustable ON-time and OFF-time
    • Cycle can begin with relay energized or de-energized
    • Relay rated 10A @ 250 VAC Resistive
    • Compact Size (1/16 DIN)
    • DPDT Relay Output
    • Power: 20VAC to 240VAC
    12VDC to 240VDC
    • LED Indicator for Power and Relay energized output
    • Can be DIN Rail mounted with DIN RAIL socket