"Our job is helping you do your job"
800.544.2843Email 
  • Monarch BBL, DBL, and PBL Stroboscopes

    The Monarch Nova-Strobe LED family of rugged industrial stroboscopes provide an extremely bright, uniform light output for performing stop motion diagnostic inspection and RPM measurements. The twelve LED light source is extremely efficient which means long battery life and continuous cool operation. A wide operating range of 30-500,000 flashes per minute covers all applications. The Basic BBL is designed for simple stop motion inspection and RPM measurement applications. The Deluxe DBL adds internal phase shifting, memory for up to 5 preset flash rates, N.I.S.T. calibration certificate and tachometer mode for speed measurements up to 500,000 rpm using optional remote sensors or TTL pulse input/output. The top of the line Phaser PBL has all the features of the DBL and adds external phase delay, time delay and virtual RPM mode. The PBL will also run continuously, 24/7 with the power supply/recharger. Each unit is available stand alone or as a kit.
    Features:
    • Flash rates from 30 to 500,000 flashes per minute
    • Diagnostic inspection and RPM checks
    • Digital LCD backlit display
    • Tripod mounting bushing (1/4-20) in handle
    • CE marked and RoHS compliant
    • Flash rate may be displayed in Flashes per Minute (FPM) or Flashes per Second (Hz)
    • Adjustable brightness control
    • Lightweight Industrial design
    • 12 button keypad makes entering flash rates extremely quick (DBL, PBL models)
    • Individual input and output TTL jacks (1/8 inch phone) provides power to remote sensors and allows "daisy-chaining" of multiple strobes. A  Tachometer mode allows accurate speed measurement up to 500,000 RPM using external sensors (DBL, PBL models)
    • Brightest portable LED strobes available
    • NIST Certificate of Calibration included with DBL and PBL models
    • Continuous operation, 24/7 (PBL)

    Benefits of LEDs:

    • Energy efficient with long battery life (8-10 hours typical) 
    • Extremely bright, uniform light output
    • Completely silent
    • Cool operation
    • No lamp replacements
    • Extremely high flash rates (up to 500,000 FPM)

  • PLS Pocket LED Stroboscope

    The Monarch PLS Pocket LED Stroboscope is a compact, rugged, light weight device that provides a super bright, uniform light output for performing visual diagnostic inspection and RPM measurements. The silent cool running LED’s are extremely energy efficient providing up to 5 hours of operation on a single charge. A wide operating range of 30-300,000 flashes per minute covers most industrial applications. Additional features include external input for remote triggering or tachometer mode, pulse output, memory for up to 5 preset flash rates, N.I.S.T. calibration certificate, tachometer mode for speed measurements up to 250,000 rpm using optional remote sensors and TTL pulse output. 

    Features:
    • Energy efficient with long battery life
    • Lightweight and pocket sized
    • Extremely bright, uniform light
    • Quiet/Cool operation
    • No lamp replacements
    • Diagnostic inspection and RPM checks
    • Digital LCD backlit display
    • Tripod mounting bushing (1/4-20)
    • CE marked, RoHS compliant
    • NIST Certificate included
    • Intuitive one hand operation

  • PSX Palm Strobe X Stroboscope

    Palm Strobe X offers excellent brightness, exceptional features and extra long battery life. Unique one-touch joystick type button allows single hand operation for fast frational RPM tuning. Select mode of operation for internal tuning, external TTL input, tachometer display and x2 /2 functions. Eight memory positions provide rapid recall of user defined frequencies.

    Features:

    • PALM STROBE x has a removable, re-chargeable battery pack.
    • Unique joy-stick tuning button for single hand operation
    • Light weight
    • Flash rates to 12,500 FPM
    • Tachometer mode from remote sensors
    • TTL compatible input/output
    • N.I.S.T. Calibration included
    • Available as a complete Kit with Strobe, (2) spare batteries, re-charger (115 or 230 or Universal Vac), Spare Lamps, Holster and Carrying Case.

  • ACT Series

    The ACT-1B can be factory configured to meet your specifications or user configured on site with the optional USB Programming Cable and Software.

    The ACT-3X Panel Tachometer is a powerful NIST calibrated fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device. The unit operates from 120/240Vac input power or from 12 or 24Vdc input power (optional). Programming is easily performed through the 5 front panel push buttons or using the optional PM Remote Software. Set up for single channel monitoring or use the auxiliary second channel input. Programmable scale factor with menu selection for multiple pulses per revolution, linear rates, totalization, single event trip speeds and rate of change in rpm. A TTL pulse repeater output is standard.

     

  • F2A1X

    The F2A1X Frequency to Analog module converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mAdc) output. The output signal is electrically isolated from input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A1X is factory preprogrammed with the full scale output and input scale factor of your choice. These settings are also user configurable with the optional USB programming cable and PM Remote Software. PM Remote Software also displays data in real-time and allows data to be stored directly to Microsoft Excel. The F2A1X requires 12-24Vdc input power.

    Features:

    • Economically priced
    • Compact, rugged and lightweight construction
    • Electrically isolated input/output
    • Compatible with most speed sensors
    • 12 to 24 Vdc input power
    • User configurable*
    • View real-time data on PC*
    • Store data in Excel file in real-time*
    • -20mA or 0-5Vdc scalable output
    • 5Vdc or 10Vdc sensor supply (jumper selectable)
    • *Requires optional USB programming cable and PM Remote Software 

    Typical Uses:

    • Process monitoring
    • Tachometer signal generator
    • QC and R&D
    • Engine performance
    • Signal conditioning
    • Data acquisition
    • Motor or pump monitoring

  • F2A3X

    The F2A3X Frequency to Analog Converter is a DIN rail module that converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mAdc) output. The output signal is electrically isolated from the input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A3X is completely user programmable using the included PM Remote Software.

    Features:

    • Standard DIN rail mounting
    • Ethernet communications available
    • 5 to 999,990 RPM range (0.083 to 250kHz)
    • Compatible with most speed sensors (TTL)
    • 12 to 24 Vdc input power
    • Alarm set point with optional relay output
    • Pulse repeater output
    • User configurable
    • View real-time data on PC
    • 4-20mA or 0-5 Vdc scalable output
    • 10 Vdc or 5 Vdc sensor excitation

    Typical Uses:

    • Process monitoring over networks
    • Tachometer signal generator
    • QC and R&D
    • Engine performance
    • Signal conditioning
    • Data aqcquisition
    • Motor or pump monitoring


     

  • 6180-031