"Our job is helping you do your job"
800.544.2843Email 
  • HC Series Group pic

    The Generant Series HC, High Capacity Regulators are ideally suited for industrial applications requiring a rugged high flow pressure regulator. The Series HC features Heavy Duty all metallic body and spring chambers and are easily rebuilt in the field. The Series HC is available in Relieving and Non-Relieving configurations ideally suited for both liquid and gas service.

  • HC Series Group pic
  • QA

    The Generant Quick Change Regulator and Control Valve is infinitely adjustable from shut-off to full line pressure within 180˚ swing.  Any intermediate pressure can be accurately maintained depending on the position of the handle.  The self relieving design permits instant pressure reduction.  Since supply pressure can be completely cut off the unit actually functions as a regulator and control valve.  This valve incorporates Generant's patented venturi design to increase flow rate.  It is constructed of forged brass and other high grade non-rusting materials, can be mounted in any position to accommodate any application and also can be panel mounted.  The Quick Change Regulator is available in two standard models, a two port model that has inlet and reduced pressure ports and a four port model that has two additional 1/4" gauge ports.  Both models are availabe in 1/4", 3/8" and 1/2" pipe sizes. 

  • F Series

    The 4F Regulators incorporate long lasting metal diaphragms (phosphor bronze).  They are recommended for accuracte pressure regulation for steam, air, water, oil and gases.  Generant Regulators are constructed of quality materials throughout, assuring long, trouble free service.  Bodies are forged brass, internal parts are brass or other non-rusting materials.  The self aligning design allows greater air flow with lower pressure drop.  Two port regulators have two in-line ports.  Four port regulators have two additional 1/4" pipe size outlet ports for pressure gauge or other use.

  • F Series

    *Repair kits may also be used on 2 port models.

  • NR

    Designed specifically for Large Vehicle NG Fueling Systems, the Series NR features our unique pre-formed Phosphorous Bronze Dual Diaphragm Stack providing increased sensitivity to changes in fuel demand over conventional flat sheet metal diaphragm designs. The metal diaphragms also provide wider temperature operating conditions than elastomeric diaphragm designs. An integral Stainless Steel filter screen aids in providing long service life. The Series NR has been tested and certified for use on Natural Gas Vehicle Fueling Systems to the rigid standards of the European Regulation ECE R110. All NR Series Regulators are provided R110 Stamped.

  • NR
  • PR Pilot Pressure Regulator

    Generant Series PR, Pilot Pressure Regulators are balanced, relieving regulators ideally suited for providing a reliable, constant pilot pressure to a Pilot Operated / Dome Loaded regulator. The balanced design allows for a consistent, regulated downstream pressure regardless of fluctuations in inlet pressure. The relieving function allows the regulator to vent when adjustments are made without the need for bleeding pressure from the pilot circuit. Materials of construction allow for compatibility with most gases. The Series PR can be ordered Cleaned & Packaged for Oxygen Service.

    *Note: Regulators have 1/4" NPT Female Outlet Pressure Gauge Ports.

  • PR Pilot Pressure Regulator
  • CR Cryogenic-Pressure Build Regulator

    The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function and increased sensitivity to downstream pressure changes as a function of our pre-formed all metallic diaphragm and optimized spring design. The unique diaphragm is unlike anything on the market today and results in less decrease in Cryogenic vessel pressure and faster recovery during periods of higher demand, thus decreasing the potential for flooding the pressure build coil. The unit features a 304 SS Inlet Strainer/Filter to aid in reducing contaminant related failures. Optional Cleaned and Packaged for Oxygen Service Series CR Regulators utilize Monel Inlet Strainer/Filters. All Series CR Cryogenic Regulators are 100% Factory Tested and are supplied factory pre-set.

  • CR Cryogenic-Pressure Build Regulator
  • GDR Group Pic

    The GDR Series Regulator provides reliable, precise pressure control in the most demanding applications. Optimized Venturi and spring design assures high flow with extremely low droop characteristics. Solid non-tied diaphragm and all brass construction guarantees leak free long lasting performance. Fully balanced design virtually eliminates outlet pressure fluctuations due to inlet pressure variations. All GDR Series regulators are 100% factory tested.

    Note:
        * Pilot Operated Regulators fail closed on loss of pilot pressure.  Regulators fail open on loss of outlet pressure when pilot pressure is present.
        * All Regulators are supplied with 2 (two) 1/4" NPT Pipe Plugs.  Pipe plugs are supplied finger tight.
        * Final installation is the responsibility of the end user.

  • GDR Group Pic
  • J Series

    The same quality built into Generant's standard regulators is found in the Generant Jr. Mini Regulators.  These regulators employ the patented Generant venturi design and are constructed of rugged brass bar stock, precision machined to the highest standards of workmanship.  The unique venturi permits the unit to pass a substantially larger volume of air than most minis and some standard regulators currently available.

    The performance capabilities of the Generant Jr. miniature regulator are truly its best asset.  This 2.5" x 1.5" regulator is able to pass up to 80 CFM at 100 psi with 200 psi supply pressure. 

    The simple operation, outstanding quality, dependable performance and economical pricing marks this miniature regulator as one of the "GIANTS" in the miniature regulator field.

  • J Series