"Our job is helping you do your job"
800.544.2843Email 
  • 2020_2120_Series_Manifold_category pic
  • 2000, 2100 Series Composite pic
  • 2020_2120_Series_Manifold_category pic
  • 2000, 2100 Series Composite pic
  • 2180 Series Category pic
  • 2600-2700 Series Composite pic
  • 2600-2700 Series Composite pic
  • Manifold Dialectric Kit
  • 3010-3110 Series Category pic

    • Available in block, single flange, or double flange connection for remote or
      direct installation
    • Designed for use with differential pressure transmitters incorporating
      two isolation valves and an equalizing valve in differential pressure
      measurement
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • 3010 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
    • 3110 Series soft seat valves have 6,000 psi pressure rating @ 200 °F
    • 3110 Series soft seat valves also feature a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy
      roddable cleaning
    • Blow-out proof stem provides a secondary stem seal in the full open
      position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect
      from corrosion and galling; PTFE or Grafoil® packing optional
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below
      the bonnet threads
    • Slotted spring pin to prevent accidental loosening
    • Vinyl dust caps for bonnets and stems (non-packing)


    *If a packing option is chosen, maximum pressure rating is 6,000 psi.  Refer to the "Pressure vs. Temperature: Packing Style with Compatible Fluid" .pdf on the right-hand side of this page.

  • 3010-3110 Series Category pic

    • Available in block, single flange, or double flange connection for remote or
      direct installation
    • Designed for use with differential pressure transmitters incorporating
      two isolation valves and an equalizing valve in differential pressure
      measurement
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • 3010 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
    • 3110 Series soft seat valves have 6,000 psi pressure rating @ 200 °F
    • 3110 Series soft seat valves also feature a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy
      roddable cleaning
    • Blow-out proof stem provides a secondary stem seal in the full open
      position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect
      from corrosion and galling; PTFE or Grafoil® packing optional
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below
      the bonnet threads
    • Slotted spring pin to prevent accidental loosening
    • Vinyl dust caps for bonnets and stems (non-packing)


    *If a packing option is chosen, maximum pressure rating is 6,000 psi.  Refer to the "Pressure vs. Temperature: Packing Style with Compatible Fluid" .pdf on the right-hand side of this page.

  • 3510 Series Category pic

    • Designed for use with differential pressure transmitters incorporating
      two isolation valves and an equalizing valve in differential pressure
      measurement
    • Available in block, single flange, or double flange connection for remote
      or direct installation
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • Soft seat design has 6,000 psi pressure rating @ 200 °F
    • Features a replaceable Delrin® seat, and straight through porting for
      bidirectional, high capacity flow and easy roddable cleaning
    • Blow-out proof stem provides a secondary stem seal in the full
      open position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below
      the bonnet threads
    • Slotted spring pin to prevent accidental loosening
    • Vinyl dust caps for bonnets and stems
    • Non-rotating stem tip standard on isolation valves

  • 3610-3710 Series Category Pic

     

    • Compact design is ideal for installations with limited space, such as
      behind panels or in cabinets
    • Designed for use with differential pressure transmitters incorporating
      two isolation valves and an equalizing valve in differential pressure
      measurement
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
      back-up metal-to-metal seal (U.S. Patent 6,820,857)
    • 3610 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
    • 3710 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
    • Blow-out proof stem provides a secondary stem seal in the full
      open position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
    • Vinyl dust caps for bonnets and stems (non-packing)
    • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
      increase the pressure range of the valve (U.S. Patent 7,758,014)



    *If a packing option is chosen, maximum pressure rating is 6,000 psi.  Refer to the "Pressure vs. Temperature: Packing Style with Compatible Fluid" .pdf on the right-hand side of this page.

  • 3610-3710 Series Category Pic


    • Compact design is ideal for installations with limited space, such as
      behind panels or in cabinets
    • Designed for use with differential pressure transmitters incorporating
      two isolation valves and an equalizing valve in differential pressure
      measurement
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
      back-up metal-to-metal seal (U.S. Patent 6,820,857)
    • 3610 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
    • 3710 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
    • Blow-out proof stem provides a secondary stem seal in the full
      open position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
    • Vinyl dust caps for bonnets and stems (non-packing)
    • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
      increase the pressure range of the valve (U.S. Patent 7,758,014)


    *If a packing option is chosen, maximum pressure rating is 6,000 psi.  Refer to the "Pressure vs. Temperature: Packing Style with Compatible Fluid" .pdf on the right-hand side of this page.

  • Manifold Dialectric Kit
  • 5030-5130 Series Category pic 1

    • Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
    • Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
    • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
    • Available in block, single flange, or double flange connection for remote
      or direct installation
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
    • 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
    • 5130 Series valves also feature a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable
      cleaning on the block valves
    • Blow-out proof stem provides a secondary stem seal in the full
      open position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below
      the bonnet threads
    • Slotted spring pin to prevent accidental loosening
    • Vinyl dust caps for bonnets and stems (non-packing)
    • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
      increase the pressure range of the valve (U.S. Patent 7,758,014)

    *If a packing option is chosen, maximum pressure rating is 6,000 psi.  Refer to the "Pressure vs. Temperature: Packing Style with Compatible Fluid" .pdf on the right-hand side of this page.

  • 5030-5130 Series Category pic 1

    • Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
    • Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
    • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
    • Available in block, single flange, or double flange connection for remote
      or direct installation
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
      and reliability
    • 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
    • 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
    • 5130 Series valves also feature a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable
      cleaning on the block valves
    • Blow-out proof stem provides a secondary stem seal in the full
      open position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below
      the bonnet threads
    • Slotted spring pin to prevent accidental loosening
    • Vinyl dust caps for bonnets and stems (non-packing)
    • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
      increase the pressure range of the valve (U.S. Patent 7,758,014)

    *If a packing option is chosen, maximum pressure rating is 6,000 psi.  Refer to the "Pressure vs. Temperature: Packing Style with Compatible Fluid" .pdf on the right-hand side of this page.

  • 5530 Series Category Pic 1

    • Designed for use with differential pressure transmitters incorporating two
      isolation valves, two equalizing valves and a vent valve in natural gas
      applications
    • Flare Pattern™ valve configuration provides maximum clearance for
      fingers during operation
    • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
      back-up metal-to-metal seal (U.S. Patent 6,820,857)
    • Non-rotating stem tip standard on large bore shut-off valves
    • Available in block, single flange, or double flange connection for remote or
      direct installation
    • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
    • Soft seat design has 6,000 psi pressure rating @ 200 °F
    • Features a replaceable Delrin® seat, and straight through porting for
      bidirectional, high capacity flow and easy roddable cleaning on the
      block valves
    • Blow-out proof stem provides a secondary stem seal in the full
      open position
    • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
    • All stems are 316 stainless steel
    • All stem threads are rolled for strength and ease of operation
    • One-piece bonnet with a metal-to-metal seal to the valve body below the
      bonnet threads
    • Slotted spring pin to prevent accidental loosening
    • Vinyl dust caps for bonnets and stems
    • Non-rotating stem tip standard on isolation valves

  • Manifold Dialectric Kit
  • Type 1500 Manifold