"Our job is helping you do your job"
  • 16M Series Level Controls

    • Solid state reliability
    • 8-pin Octal or DIN style plug
    • LED monitoring
    • CSA Approval
    • U.L. "Motor Control"
    • Control Style: Plug-In Module
    • Contact Rating: 10 Amp Resistive 1/3 horse power
    • Non-intrinsically safe

    Note on available Time Out Option:

    The latching circuit for the high and low electrode has an optional timer.  In some applications the High or Low electrode may become short circuited or disconnected.  Such an occurrence may potentially overfill in fill applications, or cause the pump to run dry in pump down applications.  The time option is custom programmed up to 3 minutes.  When a fault condition occurs, the FILL LED will have a blink sequence of .5 seconds on 2 seconds off.


  • Series 3R Probes

    • Metallic Rods
    • Available in many materials for various requirements
    • Adaptable for various fittings

    For general purpose use, Series 3R probes are metallic rods with threaded ends that screw into a fitting that extends vertically down into the liquid.  Available in a variety of materials for different applications.


    • General Purpose Immersion
    • For use with Series 3E, 3F, 3G and 3B fittings

    *Sheathing options available at checkout.

  • 3F Fitting

    Designed for general purpose service, Series 3F flanged, pressure-tight fittings can handle up to 7 probes. They mate with standard pipe flanges coupled to the top of the vessel and are available in a variety of materials. 

    • Flange Mount
    • Brass, PVC, Carbon Steel, Stainless Steel or Forged Steel Housing
    • 1 to 7 Probes
    • CSA Approved

  • 3G Fitting

    Series 3G fittings are designed for general purpose use, and are made of PVC to withstand corrosive conditions. The flanged assemblies are sized to accommodate up to 7 probes and to mate with standard flanges on the tops of vessels.

    • NPT, Flange or Bracket Mounting
    • PVC Housing
    • 1 to 7 Probes
    • Pressure Tight Assembly
    • Accepts Various Probes

    *Please call to configure your fitting and receive a quote.

  • 3E Fitting

    Series 3E fittings are cast metal, pressure-tight assemblies capable of holding 1-7 probes. Fittings are attached to vessels via male NPT mounting. Series 3E Fittings require the use of 3R rigid or 3W wire suspended electrodes. 

    • 1" to 3" NPT Mounting
    • Brass, Stainless Steel or Cast Iron Housing
    • 1 to 7 Probes
    • FM and CSA Approved
    • UL Recognized

  • 3H Fitting

    Series 3H electrode fittings feature a one piece electrode core which can be trimmed to length in the field. One piece construction simplifies installation. Series 3H fittings are available with three different mounting threads, and are capable of withstanding up to 250 psig (17 bar) at 406°F (208°C).

    • 3/8” NPT or 5/8” NF/NFE Mounting
    • Stainless Steel Body
    • Single Probe and Fitting
    • Compact Size
    • Nylon Insulation Sleeve
    • Pressure Tight
    • Various Threaded Sizes
    • CSA Approved
    • FM Approved
    • U.L. Recognized

  • Series 3W
  • Warrick Series 27

    • Solid State Reliability
    • Up to 100K Ohm/cm Sensitivity
    • Internal Surge Suppression
    • Single Level or Differential Service

    Series 27 intrinsically safe controls have SPDT output contacts and are UL approved for use in Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III hazardous locations.  Control sensitivity is factory-set.  Series 27 is UL Pilot Duty rated.  CSA certified for Class I, Groups A, B, C and D; Class II, Groups E, F and G; Class III.


    • Hazardous atmospheres
    • Pumps
    • Waste Treatment
    • Alarms
    • Sewage
    • CP Industry