Output Signal |
N/A 4 mA to 20 mA, 2-wire |
Hysteresis |
N/A ≤ ± 0.1% full scale |
Repeatability |
N/A ≤ ± 0.05% full scale |
Stability |
N/A ≤ ± 0.2% full scale for 1 year, non-accumulating |
Pressure Ranges |
N/A Standard ranges from vacuum to 60,000 psi |
Proof Pressure |
N/A 1.2 times full scale for ranges 0 psi to 25,000 psi and 0 psi to 60,000 psi 1.5 times full scale for 0 psi to 15,000 psi range 2 times full scale for ranges 0 psi to 300 psi through 0 psi to 10,000 psi 3.5 times full scale for ranges 0 psi to 5 psi through 0 psi to 200 psi |
Burst Pressure |
N/A 2 times full scale for ranges 0 psi to 25,000 psi and 0 psi to 60,000 psi 3 times full scale for 0 psi to 15,000 psi range 4 times full scale for ranges 0 psi to 300 psi through 0 psi to 10,000 psi 4 times full scale for ranges 0 psi to 5 psi through 0 psi to 200 psi |
Power Supply |
N/A 10 Vdc to 30 Vdc (4 mA to 20 mA, 2-wire); (Unregulated power supplies) |
Load Limitations |
N/A ≤ (VPower - 10)/0.020 Amp |
Response Time |
N/A ≤ 1 ms (between 10% and 90% full scale) |
Durability |
N/A > 100,000,000 full scale cycles |
Adjustment |
N/A ± 10% full scale for zero and span |
Temperature Ranges |
N/A Ambient -4 °F to 176 °F (-20 °C to 80 °C) Compensated 32 °F to 176 °F (0 °C to 80 °C) Media -4 °F to 185 °F (-20 °C to 85 °C) Span effect is ± 0.011% full scale/ °F Storage -22 °F to 221 °F (-30 °C to 105 °C) Zero effect is ± 0.011% full scale/ °F |
Wetted Materials |
N/A Series 625 is 316 stainless steel for ranges up through 0 psi to 300 psi, 316 stainless steel with 17-4PH stainless steel diaphragm for ranges 0 psi to 300 psi and higher; Series 626 is 316 stainless steel with NBR o-ring; Hastelloy® C4 optional; FKM o-ring optional |
Housing Material |
N/A 316 Stainless Steel |
Environmental Rating |
N/A IP65 to IP67 depending upon electrical connection |
Electromagnetic Rating |
N/A 2004/108/EEC, EN 61326 Emission (Group 1, Class B) and Immunity (industrial locations) |
Electrical Protection |
N/A Reverse polarity, over-voltage and short circuit protected |
Shock |
N/A 1000 g's according to IEC770 for mechanical shock |
Vibration |
N/A 20 g's according to IEC770 under resonance conditions |
Hazardous Approvals |
N/A ANSI/ISA-12.27.01-2003, Approved single seal Factory Mutual and Canadian Standards Association approved as indicated |
Weight |
N/A Approximately 7 oz. |
