"Our job is helping you do your job"
800.544.2843Email 

Hysteresis

N/A ≤ ± 0.1% full scale

Repeatability

N/A ≤ ± 0.05% full scale

Stability

N/A ≤ ± 0.2% full scale for 1 year, non-accumulating

Proof Pressure

N/A 1.5 times full scale for 0 psi to 15,000 psi range 1.75 times full scale for ranges 0 psi to 300 psi through 0 psi to 10,000 psi 3 times full scale for ranges 0 psi to 15 psi through 0 psi to 200 psi

Burst Pressure

N/A 3 times full scale for 0 psi to 15,000 psi range 3.8 times full scale for ranges 0 psi to 15 psi through 0 psi to 200 psi 4 times full scale for ranges 0 psi to 300 psi through 0 psi to 10,000 psi

Load Limitations

N/A ≤ (VPower - 10)/0.020 Amp for 4 mA to 20 mA≥ 10,000 Ω for 1 Vdc to 5 Vdc, 3-wire

Zero/Span Offset

N/A ≤ 0.5% full scale

Response Time

N/A ≤ 1 ms (between 10% and 90% full scale)

Durability

N/A > 100,000,000 full scale cycles

Wetted Materials

N/A Model 621 is 316 stainless steel for ranges up through 0 psi to 300 psi, 316 stainless steel with Elgiloy ranges 0 psig to 500 psig and higher; Model 622 is 316 stainless steel with NBR o-ring; (FKM o-ring optional)

Housing Material

N/A 316 Stainless Steel

Environmental Rating

N/A NEMA 4x (IP67)

Electromagnetic Rating

N/A 2004/108/EEC, EN 61326 Emission (Group 1, Class B) and Immunity (industrial locations)

Shock

N/A 1000 g's according to IEC 770 for mechanical shock

Vibration

N/A 20 g's according to IEC 770 under resonance conditions

Hazardous Approvals

N/A ANSI/lSA-12.27.01-2003, Approved single seal Dust Ignition-proof with entity approval for Class II/III, Division 1, Groups E, F and G Explosion-proof with entity approval for: Class I, Division 1, Groups A, B, C and D Factory mutual and CSA approved Maximum electrical ratings 30V, 20 mA