"Our job is helping you do your job"
Data Logger with 4.3" color display, 10 isolated analog channels, 4 digital channels, 4 alarm outputs, 4GB internal memory, SDHC card slot (max 32GB), USB PC interface. Includes APS software, start-up manual, AC power supply

Number of Analog Input Channels

N/A 10

External Input/Output

N/A Input: Trigger or Sampling (1 channel), Logic/Pulse (4 channels) Output: Alarm (4 channels)

Sampling Interval

N/A 10 ms to 1 hr. (10 ms to 50 ms: voltage only) signal

Pulse Input Function

N/A Accumulating Count: Accumulates the number of pulses from the start of measurement 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale) Instant Count: Counts the number of pulses per sampling interval 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale) Rotation Count (RPM): Counts the number of pulses per sampling interval and converts to rpm (rotations per minute), Number of pulses for one rotation can be set to 50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale)

Calculation Function

N/A Between channels: Addition, Subtraction, Multiplication, and Division for analog input Statistical: Select two calculations from Average, Peak, Maximum, Minimum, RMS

Search Function

N/A Search for analog signal level, values of logic or pulse or alarm point in captured data

Interface to PC

N/A USB (Hi-speed), WLAN (using B-568 option)

Storage Device

N/A Media: SD memory card (Support SDHC, up to 32 GB), supports 2 slots Saved Contents: Captured data, Setting conditions, Screen copy

Capturing Mode

N/A Mode: Normal, Ring, Relay Relay:Saves data to multiple files without losing data until data capturing is stopped. Ring: Saves most recent data (Number of captured data: 1000 to 2000000 points)

Replay Data

N/A Replays captured data that was saved in th GL240 (in GBD or CSV form

Scaling (Engineering Unit) Function

N/A Analog voltage: Converts using four reference points (gain, offset) Measured value can be converted to specified engineering unit Pulse count: Converts using two reference points (gain) Temperature: Converts using two reference points (offset)

Action During Data Capture

N/A Displaying past data (using dual display mode (Current + Past data) Hot-swapping the SD memory card Saving data in between cursors

Operating Environment

N/A (When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC) 0 to 45 ºC, 5 to 85 % RH (non condensed)

Weight

N/A 500 g