"Our job is helping you do your job"
Includes NIST Traceable Certificate of Calibration, wire kit and carrying case

*For test data, please call in for a quote 

The Practical Instrument Electronics (PIE) Model 541 is the best tool for calibration, test, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, flow meters, vortex shedders, integrators, and any other Frequency devices in the shop, plant and/or field. The Model 541 brings all the features you would expect from a frequency calibrator and times new romanaving new ones. The Model 541 comes with an LED indicator showing gate time for easy trigger level adjustment. Make adjustments with the EZ-Dial™ knob or test limits with the dual action EZ-Check™ switch. Save hours of troubleshooting time on problems when compared to other calibration methods. When calibrating a totalizer, the PIE 541 eliminates the need of a stop watch. This calibrator will automatically stop when the selected number of pulses has been sent to the totalizer.

Select from 6 different frequency ranges or select totalize to source or measure pulses within a selectable time.

  • Accuracy: ±0.005% of range
  • 5 ranges from 1 CPH to 20.000 kHz for source and read
  • Totalize inputs/outputs from 1 to 99999 in 1.0 to 100.0 minutes
  • Read a wide range of frequencies and waveforms from 50 mV to 120V peak
  • Source sine and square waves, zero based, or zero crossing
  • Adjustable amplitude from 100 mV to 12V peak-to-peak
  • Gate trigger LED flashes in sync with the output frequency.  This allows easy adjustment of the attenuation for proper gate triggering.
  • EZ-Dial™ knob easily adjusts output by 1
  • Pressing down and turning will select a faster dialing speed
  • EZ-Check™ switch for 0% and 100% span adjustments
  • Store new EZ-Check™ values by pressing the EZ-Dial™ knob
  • Uses a standard 9V alkaline battery
  • Superior battery life of 45 hours under typical continuous usage
  • Easy access to battery compartment
  • Lightweight, rugged and reliable
  • Small, tough and protected to 60V

Operating Temperature

N/A -20 to 60 ºC-5 to 140 ºF

Storage Temperature

N/A -30 to 60 ºC-22 to 140 ºF

Relative Humidity

N/A 10% ≤ RH ≤ 70% (35 to 60 °C), Non-condensing 10% ≤ RH ≤ 90% (0 to 35 °C), Non-condensing

Size

N/A 7.00 x 3.30 x 2.21 in. (177.8 x 83.8 x 56.1 mm)

Weight

N/A 340 g

Battery

N/A 9V Alkaline

Miscellaneous

N/A High contrast graphic liquid crystal display with 0.45" (11.4 mm) high digits Low battery indication with nominal 1 hour of operation left Over-voltage protection to 120 Vrms (rated for 30 seconds) or 240 Vrms (rated for 15 seconds)

Temperature Effect

N/A ≤ 10 ppm/°C of range