"Our job is helping you do your job"


  • UltraRAE 3000 Monitor, Model PGM-7360
  • Wireless communication module built-in, as specified
  • Datalogging with ProRAE Studio Package 
  • Travel Download Charger
  • RAE UV lamp (9.8 eV) and RAE-Sep™ Tubes, as specified
  • Flex-I-Probe™ and short probe
  • External filter
  • Red rubber boot
  • Alkaline battery adapter
  • Lamp cleaning and tool kit
  • Lithium-ion (Li-Ion) battery with universal AC/DC adapter and international plug kit, if specified
  • Resources CD-ROM
  • Operation & Maintenance manual
  • Soft leather carrying case

    Monitor with Accessories Kit Adds:

    • Hard transport case with pre-cut foam
    • Charging/download cradle (instead of travel charger)
    • 5 porous metal filters and O-rings
    • Gas outlet port adapter and tubing
    • Organic Vapor Zeroing Kit

    Optional Calibration Kit adds:

    • Calibration gas, 34L, as specified
    • Calibration regulator and flow controller

    *Also includes wireless bluetooth

Unit of Measure



N/A Superior Performance
  • Proven PID technology
    - 3-second response in VOC mode or 60 seconds in compound-specific mode
    - Extended range up to 10,000 ppm (in VOC mode) with improved linearity
    - Humidity compensation with built-in humidity sensor
    - Automatic temperature-controlled sampling time calculation
    - Detects benzene down to 50 ppb (0.05 ppm)
  • Unique 15-minute benzene STEL calculation with 15-minute real-time benzene-specific measurement and recording
  • Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
  • New sampling probe design provides instant tube-breakthrough visibility

    Extremely Versatile
  • VOC mode or Benzene-Specific mode for extreme versatility
  • Real-time wireless data transmission with built-in Bluetooth and optional RAELink3 portable modem
  • Integrated RAE Systems Correction Factors list for more than 200 compounds, measuring more compounds than any other PID
  • Field-interchangeable battery pack is replaceable in seconds without tools

    Easy to Use
  • Large graphic display
  • Multi-language support
  • Easy access to lamp and sensor in seconds without tools

    Low Cost of Ownership
  • Inexpensive analysis using low-cost RAE-Sep tubes vs. gas detection tubes
  • Much less expensive than a portable GC, and no annual factory calibration is required
  • Applications

  • Confined space entry pre-screening during refinery and plant maintenance
  • Hazardous material response
  • Marine spill response
  • Refinery down-stream monitoring
  • Length

    N/A 10 in25.5 cm


    N/A 3 in7.6 cm


    N/A 2.5 in6.4 cm


    N/A 26 oz738 g


    N/A Photoionization sensor with standard 9.8 eV or optional 10.6 eV or 11.7 eV lamps


    N/A Alkaline battery adapter Rechargeable, external field-replaceable lithium-ion battery pack

    Operating Hours

    N/A 16 hours of operation

    Display Graphic

    N/A 4 lines, 28 x 43 mm


    N/A 1 operation and 2 programming keys, 1 flashlight on/off button

    Direct Readout

  • VOCs as ppm by volume
  • High and low values
  • STEL and TWA
  • Battery and shutdown voltage
  • Date, time, temperature
  • Alarms

  • 95dB buzzer (at 12"/30 cm) and flashing red LED to indicate exceeded preset limits
  • High: 3 beeps and flashes per second
  • Low: 2 beeps and flashes per second
  • STEL and TWA: 1 beep and flash per second
  • Alarms latching with manual override or automatic reset
  • Additional diagnostic alarm and display message for low battery and pump stall

    N/A Highly resistant to EMI/RFI. Compliant with EMC directive (2004/108/EC); R & TTE directive (1999/5/EC)

    IP Rating

    N/A IP-65, unit running

    Data Logging

    N/A Standard 6 months at one-minute intervals


    N/A 2-point or 3-point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates

    Sampling Pump

  • Internal, integrated flow rate at 400 cc/min
  • Sample from 100' (30 m) horizontally or vertically
  • Low Flow Alarm

    N/A Auto shut-off pump at low-flow condition


  • Download data and upload instrument setup from PC through charging cradle
  • Wireless data transmission through built-in BlueTooth™
  • Frequency for RAELink3 Optional Modem

    N/A 2.400 to 2.4835 GHz (license-free) 433 MHz 869 MHz 902 to 928 MHz (license free)

    RF Range

    N/A Up to 15'/4.5m (2.400 GHz - Bluetooth™), extendable with RAELink3 modem to 2 miles (3.2km)

    Hazardous Area Approval

    N/A Europe: ATEX II 2G EEx ia IIC T4 US and Canada: , Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D.

    Operating Temperature

    N/A -4 to 113 ºF-20 to 50 ºC


    N/A 0% to 95% relative humidity (non-condensing)


    N/A Durable bright red rubber boot


    N/A 3 years for 10.6 eV lamp, 1 year for 9.8. eV lamp, pump, battery, sensor and instrument

    Optional Calibration Kit

  • Calibration gas, 34L, as specified
  • Calibration regulator and flow controller
  • Optional Guaranteed Cost of Ownership Program

  • 4-year repair and replacement guarantee
  • Annual maintenance service
  • Manufacturer

    N/A RAE Systems

    Sensor Specifications

    VOCs Range

    N/A 0 to 99.99 ppm100 to 999.9 ppm1000 to 9999 ppm

    VOCs Resolution

    N/A 0.05 ppm0.1 ppm1 ppm

    VOCs Response Time (T90)

    N/A < 3 seconds

    Benzene Range

    N/A 0 to 200 ppm

    Benzene Resolution

    N/A 0.05 ppm

    Benzene Response Time (T90)

    N/A < 60 seconds

    Butadiene Range

    N/A 0 to 200 ppm

    Butadiene Resolution

    N/A 0.05 ppm

    Butadiene Response Time (T90)

    N/A < 60 seconds